Table of Contents
AfterMath - System Requirements
Related Software Links: AfterMath Support Page, AfterMath User Guide, AfterMath Electrochemistry Guide, AfterMath Installation Guide
Related Hardware Links: WaveNow USB Potentiostat, WaveNano USB Potentiostat, CBP Bipotentiostat
NOTE: These requirements were last updated on 27-MAY-2011.
Basic System Requirements
- Processor Class: Intel Pentium IV or equivalent/compatible
- Processor Speed: 1 GHz minimum recommended
- Physical Memory: 512 MB minimum recommended
- Screen Resolution: 1024 x 768 pixels or greater required
- Operating System: see instrument specific notes below
- GUI Platform: Microsoft .NET 2.0 (what's this?)
Additional Instrument-Specific Requirements
The following specifications are the minimum requirements needed if AfterMath is being used in conjunction with scientific instrumentation offered by Pine.
Pine WaveNow USB Potentiostat
- Operating System: Windows XP (32-bit only), Windows Vista (32 or 64 bit), Windows 7 (32 or 64 bit)
- USB Port: USB 2.0 port must be available
Pine AFCBP1 Bipotentiostat
- PCI Port: one PCI slot must be available for the interface board
- Interface Board: A variety of interface boards are available (click here for details)
- Operating System: Windows XP (32-bit only), Windows Vista (32 or 64 bit), Windows 7 (32 or 64 bit)
- Device Driver: Device driver version must match the interface board and operating system (click here for details)
Copyright Notice
Copyright © 2011 Pine Research Instrumentation (Raleigh, NC). All Rights Reserved.
