WaveNow & WaveNano Potentiostats: Read This First

Document ID: LMTPFIRST (REV 1) 03-APR-2009

This document provides links to important information about how to set up your WaveNow or WaveNano USB Potentiostat.

All documentation for your potentiostat and the AfterMath software package can be found at our on-line “wiki” site. There are several very useful entry points to our wiki site listed below:

http://www.voltammetry.net/pine/aftermath/install

http://www.voltammetry.net/pine/wavenow/quickstart

http://www.voltammetry.net/pine/aftermath

http://www.voltammetry.net/pine/wavenow

http://www.voltammetry.net/pine/wavenano

Both the WaveNow and WaveNano have connections for a working electrode DRIVE signal and a working electrode SENSE signal. For conventional “three-electrode” voltammetry, the DRIVE and SENSE lines must be shorted together at a point near the electrochemical cell (see link below for more information):

http://www.voltammetry.net/pine/wavenow/user/akcable5 (shielded cable design)

http://www.voltammetry.net/pine/wavenow/user/akcable3 (universal cable design)

From time to time, Pine will post updates to the AfterMath software on the following web page:

http://www.voltammetry.net/pine/aftermath/version_history

As always, if you need any help with any Pine product, please feel free to give us a call or contact us via e-mail. Our telephone number is +1 (919) 782-8320 or you can use our on-line contact form at the following web page:

http://www.pineinst.com/echem/contact.asp

• Pine Research Instrumentation Documentation Index at http://www.voltammetry.net/pine/docs
• AfterMath Software Main Support Site at http://www.voltammetry.net/pine/aftermath
• WaveNow Potentiostat Main Support Site at http://www.voltammetry.net/pine/wavenow
• WaveNano Potentiostat Main Support Site at http://www.voltammetry.net/pine/wavenano

Copyright © 2008-2009 Pine Research Instrumentation (Raleigh, NC). All Rights Reserved.